Teka TGI2 120 D User Manual download pdf (Page 15)

EN

14

vary depending on the type of the

food. Storage periods of expiry dates

of such food are indicated on the food

package by their manufacturers.

• Frozen food that you have purchased

should be placed in the freezer before

they thaw.

• Frozen food may be kept in the

compartments with drawers.

To ensure that the high quality achieved

by the frozen food manufacturer and the

food retailer is maintained the following

should be remembered:

1. Put packets in the freezer as quickly

as possible after purchase.

2. Do not exceed "Use By", "Best

Before" dates on the packaging.

3. Please note that drawers, baskets,

flaps, trays are all removable.

Defrost

Increase in the thickness of the ice

that forms on the evaporator of your

refrigerator will decrease the cooling

efficiency of it.

Therefore, you must defrost the ice

when the thickness of the ice layer

around the evaporator reaches to

approximately 5 mm. It is recommended

to defrost the ice when the refrigerator

is not filled too much or is empty.

Wrap the food in the refrigerator by a

few sheets of paper and keep them in

the coolest place possible or in another

refrigerator.

Turn the thermostat setting button to

“off” or unplug the power cable in order

to perform the defrosting.

Remove the drawers of your

refrigerator (it is not required to remove

the lid of the compartment equipped

with a lid). After some time, the water

that melts will accumulate in the

pool located at the bottom of your

refrigerator.

Remove the accumulating water by

means of a soft sponge or etc. and dry

the pool thoroughly.

Do not forget to turn the thermostat

setting button to a position other

than the “off” in order to restart your

refrigerator.

Operate your refrigerator for 2 hours

while it is empty and its doors are

closed before replacing your food into

it.

Stopping your product

If your thermostat is equipped with

“0” position:

- Your product will stop operating

when you turn the thermostat button to

“0” (zero) position. Your product will not

start unless to you turn the thermostat

button to position “1” or one of the

other positions again.

If your thermostat is equipped with

“min” position:

- Unplug your product to stop it.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 81 82

Comments to this Manuals

No comments