Teka MWE 230 G User Manual download pdf (Page 37)

T

urntable

Installation

Hub (underside)

Glass tray

Turntable shaft

a.

Never place the

glass tray

upside down. The

glass tray should never be restricted.

b.

Both

glass tray

and

turntable ring assembly

must

always be used during cooking.

c.

All food and containers of food are always placed

on the

glass tray

for cooking.

d.

If

glass tray

or

turntable ring assembly

cracks or

breaks, contact your nearest authorized service

center.

Turntable ring assembly

Countertop

Installation

Remove all packing material and accessories.

Examine the oven for any damage such as

dents or broken door. Do not install if oven is

damaged.

Cabinet:

Remove any protective film found

on the microwave oven cabinet surface.

Do

not

remove

the

light

brown

Mica

cover

that

is

attached

to

the oven

cavity

to

protect

the magnetron.

Installation

Select a level surface that provide

enough open space for the intake

and/or outlet vents.

(4) Blocking the intake and/or outlet openings

can damage the oven.

(5) Place the oven as far away from

radios and TV as possible.

Operation of microwave oven may

cause interference to your radio or TV

reception.

2. Plug your oven into a standard household

outlet. Be sure the voltage and the

frequency is the same as the voltage

and the frequency on the rating label.

WARNING: Do not install oven over a

range cooktop or other heat-producing

appliance. If installed near or over a heat

source, the oven could be damaged and

the warranty would be void.

1.

The accessible surface

may be hot during

operation.

(2) The rear surface of appliance shall

be placed against a wall.

Leave a minimum clearance of

30cm above the oven, a minimum

clearance of 20cm is required

between the oven and any adjacent

walls.

(3) Do not remove the legs from the

bottom of the oven.

(1) The minimum installation height is

85cm.

20cm

30cm

20cm

min85cm

0cm

36

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Comments to this Manuals

No comments